Schneller Versand Water cooler JMP for Ducati Hypermotard Hyperstrada 821 939

JMP Water Cooler

>>> Optimal cooling performance and durability <<<

Advantages JMP:
– better cooling performance through special fin technology
– ideal for engines with high, thermal load
– hand-welded, polished and pressure tested
– can be replaced directly against the OE cooler

Running the engine, friction and heat is automatically generated. Therefore, the engine must be cooled as best as possible to avoid overheating.
Water coolers consist of tubes and fins in between. The cooling liquid flows through these tubes. A continuous desire flow cools the liquid and thus prevents the overheating of the engine.

Water cooler variants:
– mechanically plugged cooler
– soldered cooler

Mechanically plugged cooler:
– cost- and energy-saving production
– round tubes completely plugged through the fins
– smaller air gaps between tubes and fins
– lower heat transfer / cooling capacity

Soldered cooler:
– tubes and fins are brazed in the furnace
– creation of a metallic joint
– optimal heat transfer
– flattened tubes
– larger cooling surface
– up to 60% more cooling capacity

.